Multisistema Bonifica Ambientale NTK4002

Ci sono situazioni di vita pubblica e privata dove la segretezza è cruciale. Troppo spesso la gente crede di essere al sicuro o di non rientrare in situazioni di Spionaggio o Controllo. La Soluzione è condurre regolarmente Bonifiche Elettroniche usando il miglior equipaggiamento disponibile. Ecco perchè nasce NTK-4002.

Descrizione:

NTK-4002 è un sistema veramente nuovo e completo per eseguire operazioni di Bonifica Elettronica altamente professionali. Il sistema è stato progettato per essere Modulabile attraverso le varie sonde collegabili. Infatti NTK-4001 non solo rileva i dispositivi di trasmissione che utilizzano le emissioni RF, ma anche una vasta gamma di altre tecniche ed apparecchiature che possono minare la sicurezza delle comunicazioni. Come ad esempio:

RILEVAZIONE DI EMISSIONI RF
RILEVAZIONE DI TRASMETTITORI TELEFONICI
RILEVAZIONE DI MAINS CARRIER
RILEVAZIONE DI VIDEOCAMERE OCCULTATE
RILEVAZIONE DI TRASMETTITORI A RAGGI INFRAROSSI E LASER
RILEVATORE DI MICROFONI NASCOSTI
ANALISI DELLA LINEA TELEFONICA

RF PROBE

The RF probe is designed to detect room, telephone and tracking transmitters.

SPECIFICATIONS

POWER:Supplied by main unit

FREQUENCY RESPONSE:10MHz - 6GHz

ANTENNA:6-segment whip, type active

CONTROLS:Sensitivity knob

OUTPUT:BNC, 50ohm socket (1.5metre lead connection to main unit)

SIZE:120 x 60 x 30mm

CAMERA/MAINS CARRIER PROBE

By simply unplugging the RF probe and replacing it with the camera and current carrier probe it is simple to search for hidden cameras. Devices using the mains ring as a transmission medium are also detected with this probe.

SPECIFICATIONS

POWER:Supplied by main unit

FREQUENCY RANGE:10kHz - 700kHz

ANTENNA:Permanently attached VLF loop

CONTROLS:Camera detection selection switch

Mains carrier detection selection switch

Tuning knob

INDICATORS:Camera selection or Mains carrier selection

OUTPUT:3-pin socket

SIZE:120 x 60 x 30mm

MICROPHONE PROBE

Hardwired microphone systems are difficult to detect. They are not transmitting devices and therefore, there is no RF leakage. Also, the distance between the microphone and the processing unit may be several miles. This is a favoured method of long-term eavesdropping. The microphone probe detects both active and non-active microphones.

SPECIFICATIONS

POWER:Supplied by main unit

CONTROLS:Normal/reverse microphone polarity selection switch

Line on/off selection switch

INDICATORS:Normal microphone polarity selection

Reverse microphone polarity selection

Line on selection

Line off selection

OUTPUT:3-pin socket

SIZE:120 x 60 x 30mm

TELEPHONE ANALYSER PROBE

Specifically for checking telephone lines is the telephone analyzer probe. A direct connection is made to the telephone line so that transmitters, current carrier devices or modifications to the line or the telephone can be found.

SPECIFICATIONS

POWER:Supplied by main unit

CONTROLS:RF /telephone line audio selection switch

INDICATORS:RF selection

Audio selection

INPUT:FCC telephone socket

OUTPUT:3-pin / BNC sockets

SIZE:120 x 60 x 30mm

LASER/INFRA-RED PROBE

The IR probe is designed to detect laser transmitters and devices operating in infrared frequencies.

SPECIFICATIONS

POWER:Supplied by main unit

FIELD OF VIEW:40 degrees

IR WAVELENGTH BANDPASSED:725 ? 1150nm

HALF-POWER ANGULAR RESPONSE:48 degrees

SPECTRAL PEAK:940nm (infra-red)

OUTPUT:3-pin socket

SIZE:90 x 50 x 30mm

MAIN UNIT SPECIFICATIONS

DETECTION CAPABILITY:

All types of transmitters including AM,

WFM, NFM, sub-carrier, carrier only, single

side band, double side band and

suppressed carrier. Also scrambled, burst,

frequency hopping and other spread

spectrum types

FREQUENCY RANGE:60KHz - 6GHz

RF RECEIVER TYPE:Single conversation super heterodyne,harmonics local oscillator

DYNAMIC RANGE:Typically greater than 80dB

DEMODULATORS:AM, WFM, NFM and SC

ATTENUATORS:0, -30dB at active whip

SENSITIVITY:-60dBm

TUNING METHODS:Manual tuning Automatic, to strongest signal

TONE FREQUENCY:1KHz

CONTROLS:On/off switch

Locate/verify mode switch

Automatic/manual mode switch

Tone on/off switch

Manual tuning knob

Volume control knob

INDICATORS:

Power on

Signal strength level

Manual tuning

Tone on

Mode status:locate, verify, manual or automatic Probe connection

INPUTS:

RF:BNC, 50ohm

PROBES:3-pin

AC:3-pin mains socket

DC:2.1mm 12VDC socket

OUTPUT:

3.5mm stereo headphone socket

Internal speaker (audio): 8ohm, 300mW

Internal speaker (tone): 8ohm, 400mW

AC POWER SUPPLY:

110V or 220 to 240VAC, internal selection

DC POWER SUPPLY:

12VDC external

12VDC internal rechargeable battery

INTERNAL BATTERY:

Constant current charging

6 hours operating time typically

ACCESSORIES:

Carrying case

Mains lead

Headphones

Test transmitter

Telephone connecting lead (1m)

BNC to BNC coax (1.2m)

MAIN UNIT SIZE:

250 x 240 x 65mm

FULL SYSTEM WEIGHT:

8kg (in carrying case)

(Le Caratteristiche tecniche come anche le dotazioni e migliorie possono variare ad opera del costruttore senza alcun preavviso)

Multisistema Bonifica Ambientale 60 KHz - 6 GHz